Joint Comprehensive Plan
/
Identifies Commercial Enhancement Areas, Downtown Revitalization Areas, Industrial Reinvestment Areas and Residential Reinvestment Areas.
Read More
Boiler Replacement Design
/
SSM prepared construction documents for the installation of a dual fuel 1,200 HP boiler to replace a 67 year old water tube boiler.
Read MoreEnergy Audit and Systems Design
/
SSM conducted a survey and performed an energy audit of the existing facility in 2010 and suggested several no cost and low cost strategies for saving energy as well as some capital improvement project that would have an impact on energy efficiency.
Read MoreConversion of 2 Dormitory HVAC Systems from Two-Pipe to Four Pipe Systems
/
SSM performed a detailed field survey of each building. The existing fan coil units were located in extremely tight spaces above the ceiling. Converting the system from a two-pipe system to a four-pipe system required detailed coordination with existing architecture and other utilities.
Read MoreStructural Assessment for Coal Breaker Reconstruction/Stabilization
/
Assessed the existing condition of the timber-framed structure and provided structural engineering analysis and design to replace or reconstruct a portion of the Breaker.Assessed the existing condition of the timber-framed structure and provided structural engineering analysis and design to replace or reconstruct a portion of the Breaker.
Read MoreStructural Assessment for Pier Certification
/
SSM utilizedthree-dimensional scanning to locate and identify the magnitude of surface irregularities in pier.
Read MoreNew Office Building Construction
/
Facility engineers provided complete facility services including structural, mechanical, electrical, plumbing, and fire protection design for the three-story, 75,000 square foot corporate headquarters.
Read MoreStructural Engineering for Adaptive Residential Reuse of Social Center
/Adaptive reuse of former Social Center with new floor addition
Read MoreMulti-Discipline Engineering for New Fitness Center
/
GATEWAY MOTION AND FITNESS
Gateway Motion and Fitness
Lewes, Delaware
Spotts, Stevens and McCoy has been engaged with the Owners of Midway Fitness since 2012, performing a building energy audit, expansion feasibility projects for their existing facility located in Rehoboth DE. After their decision to relocate, SSM was engaged to provide due diligence and concept planning for alternate sites with existing structures and ultimately, the greenfield site selected for development of a new facility, Gateway Motion and Fitness. Due diligence and concept planning included site and civil engineering, and multi-disciplinary building systems.
SSM is partnered with Ambit Architecture to provide professional services to develop new building design from Programming through Construction Documentation and has been further engaged as the Owner’s representative and Project Manager. The project is currently in Design Development Phase. Basis of Design calls for a 48,000 square foot multi-level facility with diverse programmatic needs for fitness, aquatics, physical therapy and administration.
SSM technical services include: structural design, mechanical, plumbing, fire protection and electrical design and Project Management services to coordinate the efforts of the architectural design work of Ambit Architecture, the engineering design teams and the pre-construction services of Wohlsen Construction.
Structural Engineering for New Animal Hospital
/
•SSM's structural engineers provided design engineering for the roof, floor wall/pier, and foundation to meet the challenging wind and seismic conditions demanded by the project location and our technical experts worked closely with the rest of the design and construction.
Read MoreAsbestos Management Services
/
Our indoor air quality specialists provided asbestos management services for 8 historic steam engines and one passenger train car at the Railroad Museum of Pennsylvania.
Read MoreMaster Plan, Phase I Restoration and Phase II Construction Documentation
/
Master Plan, Phase I Restoration and Phase II Construction Documentation of the Lehigh Railroad Engine House for the White Haven Community Library
Read MoreVentilation Studies
/
Our services to NWNA have included providing ventilation studies at these three facilities to evaluate airflow, contaminant migration, and temperature control.
Read More
Wastewater Collection System
/
SSM services included general consulting and operations assistance; design and construction management of sewage collection system, pumping station, and interceptor replacement projects.
Read MoreWastewater Engineering
/
Wastewater Collection and Treatment Services, Hydraulic Modeling, and I/I Remediation
Read MoreMulti-Disciplined, Indefinite Delivery Contract
/
SSM has supported several teams to serve in a multi-disciplinary way to the Department of Architecture and Preservation (DAP) of the Pennsylvania Historical and Museum Commission (PHMC) since 1995.
Read MoreConstruction Stakeout Surgical Tower
/
SSM is providing a full range of construction stakeout and surveying services to L.F. Driscoll for the $354 million construction of a 476,000 SF surgical tower expansion on the Reading Health System campus.
Read MorePV Solar System and Car Charging Station
/
SSM electrical engineers performed the design review for the 2.8 kW ground mounted solar array connecting the system into the campus distribution system and design review for the electrical car charging station as in-kind gifts to the University.
Read MoreMembrane Filtration Water Treatment Plant
/
SSM provided engineering services from feasibility thru construction for this 1.0 MGD Membrane Filtration Water Treatment Plant
Read More